Resin AR23 / Hardener AH23
Epoxy Structural Adhesive Paste
AR23 Resin paste with hardener AH23 paste, is a two component room temperature curing paste of high strength. Excellent chemical resistance against oil. Ideal for bonding metals, ceramics and glass. Special additives to improve adhesion to concrete and steel. Can be applied by spatula or pumped. Available in 400 ml 1:1 cartridges with static mixers.
FEATURES
High toughness with good mechanical properties
Description
Colour: AR23 – White, AH23 – Black, Mix – Grey
Mixing Ratio: AR23 100 by weight or volume
AH23 100
Viscosity: AR23 Paste – thixotropic
AH23 Paste – thixotropic
Pot life 40 to 90 minutes at 25 Deg C (150 g)
Gelation Time: 2 – 3 Hours at 25 Deg. C (150 g)
Mix well before use.
AR23 / AH23
Epoxy Structural Adhesive Paste
CHARACTERISTICS after CURE (cured at 25C for 7 days)
Bond Strength: (steel) 11 MPa
Flexural Strength: 110 MPa
Tensile Strength: 50 MPa
Elongation in Tension: 6 %
Heat Distortion Temperature: 55 Deg. C (7 days at 25 Deg C)
SAFETY PRECAUTIONS
Normal health and safety precautions apply when handling this product.
Ensure: – Adequate ventilation – Use of gloves – Use of suitable hand cleaners.
STORAGE
The shelf life is 12 months in unopened containers at room temperature.
The above data are offered for customer’s guidance only. It implies no guarantee. Customers must conduct their own tests to determine the suitability of the material for their specific applications. Technoresin cannot assume responsibility for results obtained by use of this product as we have no control over end-use application or handling. Technoresin therefore specifically disclaims any damage or loss of any kind in relation to the use of this product. (Version 23.1 Date 3.3.2023)
Reviews
There are no reviews yet.