GC348 Aluminium Gelcoat

AL Gel Coat GC348 – BWSA

Low shrinkage.                      Easy to Sand                          For composite moulds

Room Temperature              Easy to polish

                                   

 

Description

 

Aluminium filled grey gel coat, thixotropic based on epoxy resin. Together with hardener BWSA, the final surface is hard, easy to grind and polish. BWSA operates at room temperature

 

Colour:      Resin: Grey           Hardener: Amber

 

Mixing Ratio:                GC348 : BWSA     100 : 10  by weight.                                 

Viscosity:                       Thixotropic paste

Pot Life:                        10 to 15 minutes at 25 Deg. C (500g)

Setting Time:                 1 Hour at 25 Deg. C

Demoulding Time:        24  hours at 25 Deg. C (Curing time)

 

CHARACTERISTICS after CURE

Estimates

Hardness:                                         80 Shore D

Density:                                            1,5

Compressive Strength                      110 MPa

Tensile Strength                               80 MPa

Tensile Elongation                           0,5%

Flexural Strength                             80 MPa

Impact Strength                               6 KJ/m2

Heat Distortion Temperature          50 – 60 C (Martens)

 

The above data are offered for customer’s guidance only. It implies no guarantee. Customers must conduct their own tests to determine the suitability of the material for their specific applications. Technoresin cannot assume responsibility for results obtained by use of this product as we have no control over end-use application or handling. Technoresin therefore specifically disclaims any damage or loss of any kind in relation to the use of this product.

(Version 20.1 Date 1.3.2020)