Resin ER161 – Hardener EH161
ER161 – EH161 ArtGlo clear casting resin, for arts & crafts, jewellery, keyrings, etc.
ER161 Resin 5 kg
EH161 Hardener 2,5 kg
7,5 kg kit,
Low viscosity, clear, resin system for high gloss potting and ornamental applications. Contains anti UV additives.
EH161 has improved colour and UV resistance. Good viscosity, with good chemical resistance, low shrinkage, good mechanical properties. Excellent UV and weathering resistance.
Mix ratio of 100 to 50 by weight.
MIXING:
(2 cup method). Measure 100 g to 50 g by weight. Mix resin and hardener thoroughly for 1 to 2 minutes. Avoid introducing air bubbles by mixing slowing and not whipping, using a flat stick. Scrape sides. Transfer to a second cup and mix again for 1 minute. This is to ensure that the two components are 100% mixed. Any unmixed material will not cure properly and will show as a soft, stick patch
Description
Colour: Clear
Mixing Ratio: ER 161 100,0 by weight
EH 161 50,0
Viscosity: ER161 1000 mPa.s at 25 Deg. C
EH161 600 mPa.s at 25 Deg. C
Mixed 1200 mPa.s at 25 Deg. C
Pot Life: 30 to 40 minutes
Setting Time: 10 – 12 hours at 25 Deg. C
Setting Time: 2 – 4 hours at 40 Deg. C
Hardness shore D: 70- 00 (7 days at 25 C)
The above data are offered for customer’s guidance only. It implies no guarantee. Customers must conduct their own tests to determine the suitability of the material for their specific applications. Technoresin cannot assume responsibility for results obtained by use of this product as we have no control over end-use application or handling. Technoresin therefore specifically disclaims any damage or loss of any kind in relation to the use of this product.
The usual safety precautions must be followed. (Version 20.1 Date 5.1.2020)
Reviews
There are no reviews yet.