LR214-EH96/Epoxy Laminating System/6,33Kg

Resin LR214 / Hardener EH96

 

LR214 Resin:              1 x 5,0   kg   Bottle

EH96 Hardener:       1 x 1,33 kg   Bottle

 

Laminating Epoxy Resin System

Medium viscosity, clear, epoxy resin system with high elongation for high performance filament winding, laminating and tooling applications. Excellent resistance against acids, alkalis and water.  Good Thermal Shock Properties. The pot life and gel time can be adjusted with other hardeners. 

FEATURES :

Good wetting of reinforced fibers – Medium viscosity 

High heat distortion  Temperature  – High toughness with good mechanical properties

METHOD OF APPLICATION 

Hand lamination – Filament winding – Resin injection

Description

 Colour:           LR214 Clear, EH96 clear

 Mixing Ratio:     

LR214        100                  by weight

EH96           26                 

 Viscosity:            

LR214           2100 mPa.s at 25 Deg. C

EH96            600 to 900 mPa.s at 25 Deg. C

System         1000  mPa.s at 25 Deg. C     

Pot life :       35 to 40 minutes at 25 Deg C (150 g)

 Gelation Time:   25 – 30    at 25 Deg. C (200 g mass)

CHARACTERISTICS after CURE

(Unreinforced system)

Cured for 7 days at 25 C

(approximate values)

Mixed ratio: LR214 (100) – EH96 (26)

Hardness:                                             80        Shore D

Flexural Strength:                            102      MPa

Flexural Modulus:                           2780    MPa

Tensile Strength:                              42       MPa

Tensile Modulus:                             2500   MPa

Elongation in Tension:                     3,9

Heat Distortion Temperature:      60 / *100 Deg C

(*) if post cured at 100 C

Water absorption: 24 h 23 C              0,1%

 NOTE:            There is full through-cure at room temperature.

TYPICAL CURE SCHEDULES

 Use a maximum heat up rate of 20°C per hour. Cool at a maximum rate of 20°C per hour: To obtain a HDT of 100 C, post cure to 100C                    

 2 hours at 60°C + 2 hours at 80 C + 2 hours at 100C

SAFETY PRECAUTIONS             

Normal health and safety precautions apply when handling this product.

Ensure  :                     

– Adequate ventilation.

– Use of gloves and safety glasses.

– Use of barrier creams

– Use of suitable hand cleaners

STORAGE

The shelf life is 12 months in unopened containers at room temperature.

 

The above data are offered for customer’s guidance only. It implies no guarantee. Customers must conduct their own tests to determine the suitability of the material for their specific applications. Technoresin cannot assume responsibility for results obtained by use of this product as we have no control over end-use application or handling. Technoresin therefore specifically disclaims any damage or loss of any kind in relation to the use of this product. (Date 25.1.2021)