Resin LR322 – Hardener EH322
LR322 Resin 5,0 kg Bottle
EH322 Hardener 1,33 kg Bottle
Contains UV additives. Not suitable for continuous use outdoors. Protect against reflected UV rays indoors.
Make sure you seal the wood before casting.
Make enquires for suitable lessons to cast wood epoxy tables, trimming and polishing.
Resin LR322 – Hardener EH322
LR322 Resin with EH322 hardener is a low viscosity, crystal clear, resin system for high gloss large river tables, arts and crafts potting and ornamental applications.
LR322 – EH322 can be cast up to 30 mm. Low heat exotherm, anti- yellowing additives, with defoaming additives.
Coat the wood before casting the tables, using either EH16 or EH48 hardener. Let the coating set, or get to a tacky stage. These hardeners are much faster, and can be used in small casting.
Description
Colour: Crystal Clear
Mixing Ratio:
LR322 3,0 by weight
EH322 1,0
Viscosity:
LR322 2800 mPas at 25 Deg. C
EH322 75 mPas at 25 Deg. C
Mixed 900 mPas at 25 Deg. C
Pot Life: 3 to 4 hours
Setting Time: Time to achieve shore D hardness
30 mm thick block,
3 Kg, 360 x 250 mm at 27 deg. C –
After 2 days: shore D 70
After 3 days shore D 79
after 4 days 80D.
Final hardness after 1 week: 83D.
Food grade, according to supplier’s data sheet.
The above data are offered for customer’s guidance only. It implies no guarantee. Customers must conduct their own tests to determine the suitability of the material for their specific applications. Technoresin cannot assume responsibility for results obtained by use of this product as we have no control over end-use application or handling. Technoresin therefore specifically disclaims any damage or loss of any kind in relation to the use of this product.
The usual safety precautions must be followed. (Version 20.1 Date 1.5.2020)
Reviews
There are no reviews yet.